Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Ignition Coil

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Ignition coil

If the engine is only running on three cylinders, one possible fault may be with the spark plug coil. To access the coil replacement, remove the engine cover. Disconnect the ignition coil connector and unscrew the two securing bolts with a ratchet, removing them manually to avoid dropping them. Now, you can remove the coil by pulling it upwards. Refit the new coil, ensuring the high-tension connectors are correctly positioned. Reinsert the two securing bolts and reconnect the power connector. Replace the engine cover and perform a functionality test.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ignition coil replacement on Renault Clio
Ignition coil replacement on Renault Clio
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) Does the coil of our car need to be changed? Let's see how it replaces on a Renault clio. We pull the lever to open the engine compartment located at…
Replacement of the spark plugs of the Renault Clio III.
Replacement of the spark plugs of the Renault Clio III.
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) To replace the spark plugs of the Renault Clio, we open the hood of the engine compartment, remove the engine cover. Disconnect the connector of the …
How to replace the spark plugs of the Renault Clio 4 petrol model
How to replace the spark plugs of the Renault Clio 4 petrol model
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) The following video tutorial shows us the steps to follow to replace the spark plugs of the Renault Clio 4 petrol independently. To replace the spark…

Other guides you may be interested in

Replacing H7 Bulb in an Opel Meriva

Are the front headlight bulbs of your Opel Meriva out? Let's see how to proceed with the removal in this tutorial video. Open the bonnet and secure it, then remove the inspection caps from the headlights (at the back of the headlights) using a screwdriver or pliers. Disconnect the bulb holders from the headlight and disconnect the relevant power connectors. Replace the damaged bulbs with new ones (same size and voltage). After replacing the bulbs, refit the bulb holder into the headlight housing. Finally, close the back of the headlights with the inspection caps. Test the correct functioning of the lights by turning on the ignition.

Watch the video!


by ScegliAuto

More videos