Do it yourself
Frequently asked questions about cars and motorcycles

When and How to Change the Timing Belt on Renault Megane 2 1.5 DCI

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Timing belt

In this video, you will learn when and how to change the timing belt on a Renault Megane 2 1.5 DCI, but also on the Clio, Dacia Sandero, and Nissan Qashqai with the same engine; typically, we change the timing belt every 124,000-149,000 miles. First, open the bonnet of your car and remove the lower coolant hose, draining it into a container; then remove the crankshaft pulley to take off the V-belt. At this point, remove the left engine mount and the timing cover, lifting the engine with a jack; follow the video to the end for the replacement!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2002-2010 / Megane 2) In this guide, we will discover how to dismantle and replace the timing belt and water pump on the Renault Megane 1.5 dCi. First, lift the vehicle an…
Renault Megane (2002-2010 / Megane 2) In this guide, we will go through the main steps to change the timing belt on a Renault Megane second series with a 1.5 DCI engine. First, lift the v…
Renault Megane (2015-2023 / Megane 4, Megane IV) The timing belt on your Renault Megane with a 1.5 dCi engine should be replaced every 6 years or 160,000 miles. This varies significantly based on ve…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - What is the cost of replacing the toothed belt on the Renault Megane? Read answer
    • Megane 2015-2023 - When should the timing belt be changed in a Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos