Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Pump on a Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Fuel pump

Want to remove the fuel pump from the Twingo? Learn how to remove the fuel pump and its associated parts. Access the rear seats of the car, unscrew all the securing screws and remove them from the cabin. Use a socket to unscrew the securing screws of the metal cap, remove it from its housing, then cover the perimeter with absorbent paper to soak up any liquid leaks. Disconnect the power connectors and the liquid circulation hoses. Extract the fuel pump from its housing along with the associated parts. Install a new pump inside the Twingo's tank, then reassemble all the covering parts.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Float in a Renault Twingo?
How to Replace the Float in a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) If you need to replace the float in a Renault Twingo, you will need to disassemble the pump. This tutorial explains how to proceed. First, remove the…
How to Replace the Windscreen Washer Pump in a Renault Twingo?
How to Replace the Windscreen Washer Pump in a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In this tutorial, you will learn how to replace the windscreen washer pump in a Renault Twingo, a very simple and quick operation. First, ensure the …
How to replace the fuel filter of the Renault Twingo
How to replace the fuel filter of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Replacing the fuel filter of the Renault Twingo model 1 is an operation that can be done independently, thanks to our short video tutorial that will …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos