Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Renault Master 3 12.3 DCI

Model: Renault Master MK 3 - Years 2010-2023
Part: Starter motor

In this video, follow the instructions to remove and replace the starter motor on the Renault Master third series. First, open the bonnet of your vehicle and locate the starter motor, found at the bottom; then remove the front grille by unscrewing the fixing screws and move the coolant reservoir aside. Now remove the front headlights and the bumper to access the starter motor; remove the radiator and then the starter motor by disconnecting the electrical connectors and unscrewing the bolts with a socket spanner.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor on the Renault Master?
How to replace the starter motor on the Renault Master?
Renault Master (1997-2010 / MK 2) To replace the starter motor on the Renault Master, lift the vehicle with a jack or ramp, so you can remove the front wheels: the starter motor is lo…
How do you replace the starter motor of the Renault Master?
How do you replace the starter motor of the Renault Master?
Renault Master (1997-2010 / MK 2) It will be possible to replace the starter motor of the Renault Master by opening the hood and removing the components inside the engine compartment,…
How to replace the starter motor of the Renault Master 2.5
How to replace the starter motor of the Renault Master 2.5
Renault Master (1997-2010 / MK 2) Today's guide will show us the main instructions on how to disassemble and replace the starter motor of the Renault Master 2.5. First of all, we open…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos