Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the starter motor of the Renault Master?

Model: Renault Master MK 2 - Years 1997-2010
Part: Starter motor

It will be possible to replace the starter motor of the Renault Master by opening the hood and removing the components inside the engine compartment, on the left side compared to the engine block: once these components have been removed, it will be possible to proceed by locating the starter motor at the bottom, corresponding to the flywheel. It will be possible to remove it from its seat by loosening the screws that fix the component and disconnecting the power cables: in this way it will be possible to insert the new replacement part to verify that everything is functioning correctly.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor on the Renault Master?
How to replace the starter motor on the Renault Master?
Renault Master (1997-2010 / MK 2) To replace the starter motor on the Renault Master, lift the vehicle with a jack or ramp, so you can remove the front wheels: the starter motor is lo…
How to Replace the Starter Motor on the Renault Master 3 12.3 DCI
How to Replace the Starter Motor on the Renault Master 3 12.3 DCI
Renault Master (2010-2023 / MK 3) In this video, follow the instructions to remove and replace the starter motor on the Renault Master third series. First, open the bonnet of your veh…
How do you replace the starter motor of the Renault Master?
How do you replace the starter motor of the Renault Master?
Renault Master (1997-2010 / MK 2) On board the Renault Master, in order to carry out the replacement of the starter motor, it will be necessary to lift the vehicle using a jack or a b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos