Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Renault Master

Model: Renault Master MK 2 - Years 1997-2010
Part: Starter motor

Today we will explain how to replace the starter motor on a Renault Master model 2 vehicle. To perform this operation, we need to remove the front bumper. We open the front hood and remove the clips along the bumper, and using a torque wrench, we unscrew the bolts that secure the top of the bumper. We proceed in the same way to remove the bolts on the bottom of the bumper. We release the bumper and unscrew the locking screws along the grille. We disconnect the connector to access the inside of the hood. The starter motor is located on the lower right side of the engine. To remove it, we need to disconnect the connector and unscrew the bolts that secure the starter motor to the engine. After disconnecting the wires, we remove the piece and insert the new one. Once the connector is connected and the starter motor is secured with the bolts, we install the grille and the bumper. We start the vehicle to test the starter motor operation, and if it doesn't work, it may be necessary to replace the fuse related to it or perform a computer diagnosis.

Posted on 17 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor on the Renault Master?
How to replace the starter motor on the Renault Master?
Renault Master (1997-2010 / MK 2) To replace the starter motor on the Renault Master, lift the vehicle with a jack or ramp, so you can remove the front wheels: the starter motor is lo…
How to replace the starter motor of the Renault Master 2.5
How to replace the starter motor of the Renault Master 2.5
Renault Master (1997-2010 / MK 2) Today's guide will show us the main instructions on how to disassemble and replace the starter motor of the Renault Master 2.5. First of all, we open…
How to Replace the Starter Motor on the Renault Master 3 12.3 DCI
How to Replace the Starter Motor on the Renault Master 3 12.3 DCI
Renault Master (2010-2023 / MK 3) In this video, follow the instructions to remove and replace the starter motor on the Renault Master third series. First, open the bonnet of your veh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos