Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Control Bulbs on Renault Megane MK1

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Instrument panel light

See other generations:
Video tutorial

In this video tutorial, you will learn the instructions to remove and replace the bulbs of the air conditioning controls on the first series Renault Megane. First, get inside the vehicle and start by unscrewing the fastening screws located under the air conditioning controls, right next to the ashtray and the cigarette lighter socket; then disconnect its electrical connector.

At this point, pry on the sides of the controls to remove them, as shown in the video; now remove the bulb-type bulbs to replace them with new ones!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Air Conditioning Unit from the Renault Megane Model I
How to Remove the Air Conditioning Unit from the Renault Megane Model I
Renault Megane (1995-2003 / Megane 1) Today, learn how to remove the air conditioning unit from the Renault Megane Model I, produced from 1995 to 2003. To remove the air conditioning unit…
Replacing the Rear Light Bulbs on a Renault Megane
Replacing the Rear Light Bulbs on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the rear light bulbs on your Renault Megane, follow these steps. Open the boot and use a lever to remove the plastic cover next to the boo…
Disassembly of the rear light and bulbs of the Renault Megane
Disassembly of the rear light and bulbs of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In a few simple steps, we will see the process of how to disassemble and replace the rear light and its bulbs of the Renault Megane. First, open the …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos