Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan in the Renault Scénic 2?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

See other generations:
Video tutorial

Replacing the cabin fan in the Renault Scénic requires considerable work, as it is positioned inside the dashboard, just behind the radio. As shown in the attached video, first remove everything related to the gear console, including the knob and base, then remove the glove compartment on both the passenger and driver sides, remove the radio, the central control panel for the air conditioning, the plastic covers of the two windscreen pillars, and finally the entire dashboard.

At this point, the fan will be easily identifiable and can be replaced. As this is a lengthy and complex operation, it is advisable to consult an expert to avoid causing damage to the car.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan on the Renault Scenic?
How to Replace the Cabin Fan on the Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the cabin fan on the Renault Scenic, open the glove compartment located on the passenger side to release the retaining clips inside. This …
How to replace the cabin fan in a Renault Scenic?
How to replace the cabin fan in a Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) To replace the cabin fan in a Renault Scenic, you will need to completely dismantle the dashboard to access the underlying components. To do this, pr…
How to Replace the Cabin Fan of the Renault Scenic?
How to Replace the Cabin Fan of the Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) The cabin fan of the Renault Scenic is located inside the dashboard: it can be found at the top of the dashboard, immediately behind the instrument c…

Other guides you may be interested in

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos