Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do i replace the battery in the Renault Scenic remote control?

Model: Renault Scenic Scenic 2, MK 2 - Years 2003-2009
Part: Key

In order to replace the battery of the Renault Scenic remote control, the plastic cover located on the side of the remote control, in the lower part, must be removed. By removing the cover it will be possible to remove both the key and the battery from their housings. Once the old battery has been removed from its housing, it can be replaced by inserting a new battery. When both the battery and the key have been inserted correctly, the remote control can be closed. Finally, after replacement, it will be possible to check its correct functioning.

Posted on 19 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Renault Scenic remote control?
How to replace the battery of the Renault Scenic remote control?
Renault Scenic (2016-2022 / MK IV, MK 4, Scenic IV, Scenic 4) In this tutorial, we can see how to replace the battery of the Renault Scenic remote control, an extremely simple and quick operation. To do this, we…
How to replace the battery of the Renault Scenic remote control
How to replace the battery of the Renault Scenic remote control
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The guide shows how to replace the battery of the Renault Scenic electronic card key. After removing the mechanical key from the remote control, usin…
How to replace the battery of the Renault Scenic key remote control
How to replace the battery of the Renault Scenic key remote control
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The instructions in this guide will show us how to disassemble and replace the battery of the Renault Scenic key remote. First, take our remote contr…

Other guides you may be interested in

Removing and Replacing a Front Headlamp of a Lancia Lybra

This video explains how to remove and replace the front headlamp and its bulbs on a Lancia Lybra. The car has a very simple and quick headlamp removal system. To start, lift the bonnet, reach into the engine bay, and (specifically at the rear of the headlamp) unclip the metal tab that secures the headlamp, then use a screwdriver to undo the few Torx screws. After removing the screws, unclip the headlamp and pull it out from the bumper, disconnect the power connectors, and replace any damaged bulbs or the entire unit. The reassembly phase is very straightforward: insert the headlamp into the bumper housing as shown in the video, secure the metal tab until the headlamp clicks into place (screw in the securing screws). Finally, test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos