Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Renault Megane 4?

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Warning light – error code

After a scheduled maintenance intervention, you need to manually reset the service light on the Renault Megane 4. In this guide, you will see how to do it. Turn on the instrument cluster and, using the arrows on the right side of the steering wheel, scroll down until you find the "service interval" option. At this point, continue scrolling with the arrows until you reach the maintenance type you wish to reset and hold down the "OK" button. The message on the display will start to flash for a few seconds until the reset is complete. You can turn the ignition off and on again to check that the procedure has been carried out correctly.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane 4, Megane IV) Resetting the oil service light on the Renault Megane is very simple; let's see how to do it in this tutorial. Of course, the light should only be re…
Renault Megane (2008-2015 / Megane III, Megane 3) How to reset the service light on your Renault Megane. Enter the vehicle and turn on the instrument panel with the key. Press the button located near…
Renault Megane (2002-2010 / Megane 2) This video shows how to reset the oil service on a Renault Megane 2, an operation to be performed only after completing the required maintenance as s…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos