Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulb on Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

With the ignition key removed and the handbrake engaged, open the bonnet using the lever inside the cabin and place the support stay. Behind the headlamp, near the engine bay, there is a small lower protective cover for the lamp: remove it. Now, press on the connector of the affected bulb and pull it out. Next, detach the metal tab that holds the bulb and remove it. When fitting the new bulb, pay attention to the orientation.

Refit the metal clip, then connect the connector and finally replace the lower protective cover.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Replacing the Dipped Beam on Renault Clio 2
Replacing the Dipped Beam on Renault Clio 2
Renault Clio (1998-2005 / MK 2, Clio 2) In our other tutorials, we show you how to replace the bulbs on Renault Clio 3 and 4; here, we demonstrate on a Renault Clio 2. Working with the engi…
How to Replace the Centre Display and Radio on the Renault Clio
How to Replace the Centre Display and Radio on the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Removing and replacing the radio with display on the Renault Clio involves a few simple steps; the procedure is the same for the Renault Captur. Firs…
How to Replace the Cabin Air Filter on the Renault Clio 4
How to Replace the Cabin Air Filter on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) One of the simplest maintenance tasks you can perform on your Renault Clio Mk4 (2012-2019) is replacing the cabin air filter. In this guide, we will …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos