Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Kadjar
  6. : Tire reset on Renault Kadjar

Renault Kadjar - Video tutorial

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Tires
Operation: Tire reset on Renault Kadjar

Turn on the ignition and the engine as well. Using the buttons with the arrows, located on your right when looking at the steering wheel, scroll through the menus until you reach "tire pressure". Press and hold the "ok" key. The writings on the panel will change while the control unit checks the tire pressure, after which the warning light will disappear. Before carrying out this simple but effective procedure, however, make sure that there is no real loss of pressure in at least one of the tires: obviously check that you have not had a puncture and measure the tire pressure with a pressure gauge. Only then carry out the procedure.


Posted on 24 March 2024 by ScegliAuto



How to reset the tire pressure warning light on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Kadjar; before performing the reset, it is
How to reset the tire warning light in Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) Resetting the tire warning light in the Renault Kadjar is an extremely simple and fast operation, let's see how to proceed in this tutorial. Before d
To reset the tire pressure warning light on the Renault Kadjar.
Renault Kadjar (2015-2022 / MK 1) The following information will show us how to reset the tire pressure monitoring system (TPMS) light on the Renault Kadjar. Before performing the res

Other guides that may interest you

    Frequently Asked Questions

    • Kadjar 2015-2022 - Why did the tire warning light come on on Renault Kadjar? Read Answer
    • Kadjar 2015-2022 - The tire warning light has come on on the Renault Kadjar, what does it mean? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos