Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the starter motor of the Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Starter motor

In this guide we will see the main steps to disassemble and replace the starter motor of the Renault Megane, following the instructions below. First we open the bonnet and start by disconnecting our battery; then we remove the right wheel, lifting the car, then removing the intake sleeve connected to the throttle body. At this point we are going to unscrew the screws of the starter motor, which we find behind the engine, disconnecting its electrical connector to remove it definitively; we just have to replace it with the new one!

Posted on 11 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacing the starter motor brushes of Renault Megane - Clio
Replacing the starter motor brushes of Renault Megane - Clio
Renault Megane (2002-2010 / Megane 2) In this guide, let's see the main instructions for disassembling and replacing the starter motor brushes of the Renault Megane 1.4, but also of the C…
How to replace the starter motor of the Renault Megane 1.9 dCi.
How to replace the starter motor of the Renault Megane 1.9 dCi.
Renault Megane (1995-2003 / Megane 1) This short and simple guide will show us the instructions on how to dismantle and replace the starter motor of the Renault Megane 1.9 dCi. First, we …
How to Replace the Starter Motor on a Renault Megane
How to Replace the Starter Motor on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today we will go through the instructions that will allow us to remove and replace the starter motor on a Renault Megane. First, let's open the bonne…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos