Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

In this tutorial, see how to reset the service on the Renault Megane MK3, a very simple and quick operation, to be performed only after completing all scheduled maintenance tasks. First, insert the key and turn on the ignition, then, using the up arrow button located at the end of the right stalk, scroll through the display screens until you reach the maintenance screen. At this point, press and hold the down arrow button and release it when the reset interval appears. To verify that the procedure was successful, restart the ignition.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) Resetting the service light on a Renault Megane, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure tha…
Renault Megane (2002-2010 / Megane 2) Thanks to this video, you can learn how to reset the service light on a Renault Megane after performing the service. First, turn on the ignition and …
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to reset the service in a Renault Megane, a very simple and quick operation to perform only after completing all s…

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos