Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on the Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

This tutorial shows you how to replace the remote battery on the Renault Captur. For this simple and quick operation, you will need a small flathead screwdriver and a replacement CR2032 battery.

First, insert the screwdriver tip into the indicated slot under the lower ring and pry open the cover. Next, remove the old battery, using the screwdriver if necessary, and insert the replacement battery with the positive pole facing upwards.

Finally, reposition the cover.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Renault Captur
How to Replace the Key Fob Battery of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this guide, we will see the steps that will allow you to remove and replace the battery of the key fob for the Renault Captur, as well as the Clio…
How to change the battery of the key remote control for a Renault Captur.
Renault Captur (2019-2026 / MK 2) Replacing the battery of the key remote of a Renault Captur car is quite simple. Take the vehicle remote and apply pressure by sliding the part of th…
How to Change the Remote Battery in the Renault Captur
How to Change the Remote Battery in the Renault Captur
Renault Captur (2013-2019 / MK 1) To change the battery in the Renault Captur remote, remove the key by pressing the button on the side and extracting the key. Using a flathead screwd…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos