Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Captur
    4. : How the START & STOP of the Renault Captur works

Renault Captur - Video tutorial

Model: Renault Captur MK 2 - Years 2019-2024
Part: Brake system
Operation: How the START & STOP of the Renault Captur works

In this video tutorial you can see how Start and Stop can be put into operation in the Renault Captur, following a few simple steps. The Start and Stop system stops the engine while driving, when the vehicle stops for example in traffic jams, traffic lights, etc. In fact, just release the clutch pedal when you stop and the engine switches off, then when you have to leave, press the clutch pedal to engage the gear, at this point the engine restarts automatically. Thanks to this system, fuel consumption and greenhouse gas emissions are significantly reduced.


Posted on 27 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos