Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Daily Mileage on a Renault Trafic

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

See other generations:
Video tutorial

To reset the trip odometer, follow these two simple steps. First, access the cabin and sit in the driver's seat, turn the key and switch on the ignition.

Locate the multifunction lever behind the steering wheel on the right side; at the end of the lever, there are two buttons marked with arrows "up" and "down". Start scrolling through the various options that appear on the menu using one of the arrows; you will find, among others, the outside temperature, service, or remaining fuel range.

Once you find the trip odometer function, to reset it, simply press one of the two arrows for at least three seconds.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Renault Trafic 3
How to Reset the Service Light on the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) This guide explains the steps to reset the service light related to the service interval on a Renault Trafic mk3 independently. To reset the service …
How to Reset the Service on the Renault Trafic Van?
How to Reset the Service on the Renault Trafic Van?
Renault Trafic (2001-2014 / MK 2) In this tutorial, you will see how to reset the service on the Renault Trafic van, a very simple and quick operation to perform only after completing…
How to Remove the Rear Seats of a Renault Trafic
How to Remove the Rear Seats of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos