Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the maintenance interval on the Renault Megane?

Model: Renault Megane Megane IV, Megane 4 - Years 2015-2023
Part: Warning Light - Car Error Code

Whenever we go to replace the engine oil and the filter and therefore when the service is carried out, we must also proceed to reset the service indication that will be lit in the dashboard. To do this, we can refer to the video tutorial and the instructions below. The first thing to do is to access the passenger compartment and then turn on the control panel, using the up and down arrow controls on the right side of the steering wheel, select the revision item, press the Ok button always present on the right side of the steering wheel and hold it down to 10 seconds at least, after which the service report will be updated.


Posted on 16 May 2024 by ScegliAuto



How do you reset the Service light on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) The operation of resetting the Service light on the Renault Megane is done by turning on the instrument panel, so that you can navigate between the o
How to reset the service interval on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) Through this very useful tutorial, you will be able to see the necessary procedure to reset the service interval on a Renault Megan 4. First of all,
How to reset the service in the Renault Megane?
Renault Megane (2008-2015 / Megane 3, Megane III) In this tutorial we can see how to reset the service in the Renault Megane MK3, a very simple and fast operation, to be carried out obviously only af

Other guides that may interest you

    Frequently Asked Questions

    • Megane 2015-2023 - How to know the radio code in a Renault Megane? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos