Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on Renault Master 2008

Model: Renault Master MK 2 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Onboard computer

See other generations:
Video tutorial

If you need to change the time set on your Renault Master, follow this simple procedure: with the key inserted, the ignition on, and the engine off, use the "down arrow" button on the stalk to the right of the steering wheel, which operates the windscreen wipers, to scroll through the menu until "SET CLOCK" appears.

After a few seconds, the time will start flashing.

Press and hold the "down arrow" button until only the hour section starts flashing. At this point, use the "up arrow" button to set the correct hour.

Once done, press and hold the "down arrow" button again to make the minutes flash. Set the minutes using the "up arrow" and finally press and hold the "down arrow" button again to confirm.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Dashboard of the Renault Master
How to Set the Clock on the Dashboard of the Renault Master
Renault Master (2010-2023 / MK 3) These brief and simple steps will show you how to adjust the clock on the dashboard of the Renault Master, following the instructions below. First, g…
How to Change the Time on the Renault Master III Dashboard
Renault Master (2010-2023 / MK 3) Let's see how to adjust the time on the Renault Master III: press the button with the up arrow until the display shows "set". When this appears, do n…
How to set the clock on the Renault Master
How to set the clock on the Renault Master
Renault Master (1997-2010 / MK 2) In a few simple steps, we will see how to adjust the time on the central display of the Renault Master dashboard. First, get into the vehicle and tur…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos