Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Scenic

Model: Renault Scenic Scenic IV, Scenic 4, MK IV, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
Video tutorial

When your vehicle's service light comes on, it is asking you to take care of it, and before turning off that light, it is good practice to ensure its request is fulfilled so you can travel safely, both for you and others. To reset the service light on a Renault Scenic, first close all four doors, turn the key to position 1, and repeatedly press the selection button until the "trip" menu is highlighted on the multifunction display.

Press the selection button repeatedly until the kilometres are shown on the multifunction display. First, press and hold the phone call acceptance button for 1 second, then press and hold the OK button for 5 seconds.

Press the scroll button until you reach ASSYST PLUS, then FULL SERVICE, and confirm by pressing the OK button. Press the OK button and go back repeatedly until you exit the menu.

Turn the key to position 0. Then turn on the ignition again to check that the indicator has been reset.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before starting, ensure that the service has been completed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instrument…
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before starting, sit in the driver's seat of your Renault Scenic. Activate the engine by turning the key in the ignition. Next, select the "Service" …

    Frequently Asked Questions

    • Scenic 2003-2009 - How to enter the radio code of the Renault Scenic year 2003? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos