Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Spark plugs

In this short video tutorial we can watch how the engine spark plugs are replaced on a first generation Renault Twingo 1.2, produced from 1993 to 2007. First we pull the bonnet opening lever and open it, then we extract the spark plug key from the plastic cover of the engine and use it to extract the ignition coils of the spark plugs located in the front part of the engine. Having done this, with a socket wrench with a 16mm extension, we go to unscrew and remove the engine spark plugs and then mount new ones following the procedure in reverse.

Posted on 20 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of the Renault Twingo 1.
How to replace the spark plugs of the Renault Twingo 1.
Renault Twingo (1993-2007 / Twingo 1) The procedure to replace the spark plugs on the Renault Twingo 1 is very simple. We begin by opening the vehicle's engine hood and immediately procee…
How to adjust the valve clearance on Renault Twingo 1.2 16V
How to adjust the valve clearance on Renault Twingo 1.2 16V
Renault Twingo (1993-2007 / Twingo 1) In today's video we will see how to correctly adjust the valve clearance on a Renault Twingo 1.2 16 valve, with D4F702 engine; this procedure also ap…
How to replace the spark plugs of the Renault Twingo 1
How to replace the spark plugs of the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) Replacing the candles of the Renault Twingo 1 is a very simple operation, which can be done independently. Let's start by replacing them by opening t…

Other guides you may be interested in

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos