Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valve Clearance on a Renault Twingo 1.2 16V

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Checks and maintenance

In today's video, you will learn how to correctly adjust the valve clearance on a Renault Twingo 1.2 16 valve, with a D4F702 engine; this procedure also applies to most models in the Renault-Dacia group. First, open the bonnet of your car and start by removing the air filter box and engine cover; then remove the intake manifolds to take off the cylinder head cover by unscrewing all the securing screws. At this point, remove the spark plugs to access the valve adjustment systems; use a spanner and a feeler gauge to set the valve clearance to the specified values as per the manual!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Valves on a Renault Twingo?
How to Adjust the Valves on a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To adjust the valves on a Renault Twingo, open the bonnet to access the components in the engine bay: here you can loosen the screws securing the val…
…
How to Set the Time in a Renault Twingo?
How to Set the Time in a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial, you will learn how to set the time in a Renault Twingo, a very simple and quick operation to perform after replacing the battery or…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer
    • Twingo 2014-2024 - What are the problems of the Renault Twingo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos