Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Key

If the key fob for your Renault Twingo has stopped working, it’s probably time to replace the battery. The operation is simple and quick; all you need is a flathead screwdriver and a new battery. The correct battery model is a flat CR 2016. Take the key fob, insert the screwdriver into the slot designed for the keyring attachment, and apply pressure outward to open the casing. Replace the old battery with the new one.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on a Renault Twingo 3
How to Replace the Remote Battery on a Renault Twingo 3
Renault Twingo (2014-2024 / Twingo 3, Twingo III) At some point, you may find that the remote for the Renault Twingo 3 no longer works properly, requiring you to get closer to the car to unlock the d…
How to replace the key fob battery in a Renault Twingo
How to replace the key fob battery in a Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Replacing the battery in the key fob of a Renault Twingo is very straightforward. Take your car's remote and use a thin plastic card to insert along …
How do you replace the battery of the Renault Twingo remote control?
How do you replace the battery of the Renault Twingo remote control?
Renault Twingo (2007-2014 / Twingo 2) To replace the battery of the Renault Twingo remote control, you need to use an object to pry open the bottom of the device: by doing so, you will be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos