Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Discs and Pads

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Brake rotors

Once the vehicle is lifted and the front wheel is removed, disconnect the retaining spring applied to the caliper; lever between the disc and the caliper to slightly retract the piston and unscrew the caliper's mounting pins to remove it from its seat; then remove the caliper bracket and the disc mounting pin to take it off the hub; clean the new disc of protective oil residue, brush and lubricate the hub and caliper bracket; then install the new disc and caliper bracket, insert the new pads, retract the caliper piston using a brake caliper tool or a pair of pliers, and complete the installation by applying the spring. Pump the brake pedal until it offers the correct resistance and pay attention during the first braking.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Discs and Pads
Replacing Brake Discs and Pads
Renault Megane (2002-2010 / Megane 2) After removing the wheel with two spanners, loosen the two retaining nuts of the shoes and use a ratchet to completely remove the bolts. Remove the s…
Replacement of Front Brake Pads
Replacement of Front Brake Pads
Renault Megane (1995-2003 / Megane 1) Lift the vehicle on a hydraulic lift and remove the front wheels; lever between the pads and caliper to retract the piston and facilitate removal; un…
Checking Car Brake Discs
Checking Car Brake Discs
Renault Megane (1995-2003 / Megane 1) If your car exhibits braking system issues, such as noise when pressing the brake pedal, stop the vehicle immediately and check the braking system, w…

Other guides you may be interested in

How to Replace the Window Regulator on the Mercedes W124

First, remove the door panel of the affected door and lower the window to about 0.4 in from the seal. Then, proceed to remove the speaker by unscrewing the bolts that secure it, and gently pull off any additional protective panel. Disconnect any plugs from the controls and remove the rivets that secure the window lift mechanism. This will allow you to unscrew the bolts that secure the window's cross mounting system. Remove the entire assembly and replace it by reversing the steps described.

Watch the video!


by ScegliAuto

More videos