Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Timing belt

To replace the timing belt on a Renault Kangoo, open the bonnet to access the left side of the engine block where the belt is located. Once identified, loosen the bolt securing the tensioner pulley to remove the belt from its housing. After removing the old belt, insert the new one, aligning the engine timing, and tighten the tensioner pulley bolt. Finally, close the front bonnet of the vehicle.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Renault Kangoo?
How do you replace the timing belt of the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) To replace the timing belt of the Renault Kangoo, you need to lift the vehicle in order to completely remove the left front wheel: then you will need…
Replacement of the water pump of the Renault Kangoo 1.6 16V.
Replacement of the water pump of the Renault Kangoo 1.6 16V.
Renault Kangoo (1997-2008 / MK 1, KC, KW) Today's main instructions will show us the process of disassembling and replacing the water pump and timing belt of the Renault Kangoo 1.6 16V. First…
How to Replace the Timing Belt on a Renault Kangoo 1.5 dCi
How to Replace the Timing Belt on a Renault Kangoo 1.5 dCi
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video, we will see how to change the timing belt on a Renault Kangoo 1.5 dCi: start by disconnecting the negative battery terminal, then remo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos