Do it yourself
| ||||
|
Renault Scenic - Video tutorial
Model: Renault Scenic
MK 2, Scenic 2
- Years 2003-2009 If the Renault Scenic II key no longer works, the main reason is almost always excessive wear on the electronic key card. The card becomes particularly smooth in the central part and on the sides it is no longer read by the reader inside the slot in which it is inserted. Our youtuber has devised a very simple and functional system to overcome this problem. He has applied a small strip of velcro to the concave part of the card, so that when it is introduced into the reader it causes more friction. In this way the card is read correctly and the car works.
Posted on 28 October 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |