Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Key

As shown in this tutorial, replacing the remote battery of the Renault Clio is an extremely simple and quick operation. You will need a small flathead screwdriver and a replacement CR2032 battery. First, press the button located on the left edge, then extract the emergency key and unlock the small rear cover by levering in the indicated slot. Once fully open, remove the old battery and insert the replacement, ensuring you respect the polarity.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on the Renault Clio 5?
How to Replace the Remote Battery on the Renault Clio 5?
Renault Clio (2019-2026 / Clio V, Clio 5) To replace the remote battery on the Renault Clio 5, use an object to prise off the plastic cover with the manufacturer's logo. Once this cover is re…
How to Replace the Remote Battery on a Renault Clio?
How to Replace the Remote Battery on a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the remote battery on a Renault Clio, press the designated button at the top of the device to lift the ignition key. Use a screwdriver to …
How to Replace the Battery in the Renault Clio Remote?
How to Replace the Battery in the Renault Clio Remote?
Renault Clio (2019-2026 / Clio V, Clio 5) To replace the battery in the Renault Clio remote, extract the key from the top of the key card. Once removed, pry it up to lift the circular plastic…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos