|
Do it yourself
| |||
| ||||
How to Reset the Service Light on a Renault Megane
Model: Renault Megane
Megane III, Megane 3
- Years 2008-2015
To reset the service reminder and turn off the spanner light on your vehicle, insert the ignition key and turn it to the on position with the engine off. On the lever to the right of the steering wheel, press the button on the side of the lever until the display shows "service" with a small spanner icon next to it. At this point, press the clutch and brake simultaneously. Also, press the button you used to display the service message and hold everything for a few seconds. When it starts to flash, you know the operation has been successful. To verify, turn off the vehicle, and after you turn it back on, press again until the display shows the service message again. You will notice that the spanner icon has disappeared. The job is done.
Updated on 30 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Megane
(2015-2023 /
Megane 4, Megane IV)
Resetting the service light and the wrench light on a 2017 Renault Megane is a very simple operation that can be easily done independently. To perfor…
Renault Megane
(2008-2015 /
Megane III, Megane 3)
After performing the maintenance service, it will be necessary to reset the inspection (service) warning; let's see the reset procedure on the Renaul…
Renault Megane
(2002-2010 /
Megane 2)
.. Today we will explain how to reset the service light on a Renault Megane vehicle. To reset the light, we need to turn on the.. …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.171
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |