Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Service warning light

In this guide for the 2010 Renault Twingo, discover how to reset the service light without using external diagnostic tools. First, insert the key and turn on the instrument cluster. Then, press the button located at the end of the right lever multiple times until you see the maintenance message on the dashboard display. Now, hold down the same button used earlier until the reset is complete. Finally, turn off the ignition and you are done.

Updated on 30 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Maintenance Light on a Renault Twingo
How to Reset the Maintenance Light on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today we will discover how to reset the maintenance light on the Renault Twingo. First, get into the vehicle and turn on the ignition; then press the…
How to Reset the Service Light on the Renault Twingo?
How to Reset the Service Light on the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) To reset the Service light on the Renault Twingo, insert the key to turn on the instrument cluster. Once this is on, press the button at the end of t…
How to Reset the Service Light on a Renault Twingo?
How to Reset the Service Light on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) You can reset the Service light displayed on the instrument panel of the Renault Twingo by inserting the ignition key to activate the instrument pane…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos