Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on a 2015 Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Warning light – error code

This tutorial shows how to reset the service light on a 2015 Renault Master. First, turn on the ignition without starting the engine. Next, press the "menu" button until the small monitor below the speedometer displays "Oilwechsel bald fallig". At this point, press and hold the top button on the stalk to the right of the steering wheel. The message will start to flash until it is replaced by the word "Service" followed by the mileage count. Now, press and hold the top button again until the message stops flashing, and the reset will be complete.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master 2, follow these steps: Turn on the ignition without starting the engine. Press the reset button on the…
Renault Master (2010-2023 / MK 3) In this guide, we will discover how to reset the engine oil warning light (service) on a Renault Master. First, get into the vehicle and turn on the …
Renault Master (2010-2023 / MK 3) Among the operations to perform on the vehicle, resetting the service light is one of the simplest, and today you will see how to carry out this oper…

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - Where can I find the unlock code for the Renault Master van's radio? Read answer
    • Master 1997-2010 - Where is the Renault Master 2 radio unlock code? Read answer
    • Master 2010-2023 - How to reset the "service" of a Renault Master? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos