Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Kangoo
    4. : How to reset the service in a Renault Kangoo 1

Renault Kangoo - Video tutorial

Model: Renault Kangoo KW, KC, MK 1 - Years 1997-2008
Part: -board computer
Operation: How to reset the service in a Renault Kangoo 1

In this video tutorial we will see how to reset the service in a Renault Kangoo 1, following a few simple steps: first you need to carry out maintenance on the vehicle, such as changing the engine oil and filters. After performing the do-it-yourself coupon, you need to get on board the car, turn on the ignition, press and hold down the button located under the speedometer, until the hands move automatically and the system starts resetting, this process lasts about 5 minutes, then you have to wait until the hands stop. After shutdown it resets itself.


Posted on 14 May 2023 by ScegliAuto



How to reset the service reminder on Renault Kangoo.
Renault Kangoo (2020-2024 / FFK, KFK, MK 3) In this video, we see how to reset the service reminder on the Renault Kangoo (but the procedure is the same for the Nissan NV250 as well). We will u
How to reset the service in the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial, we can see how to reset the service on the Renault Kangoo, an extremely simple and fast operation, to be carried out only after com
How to reset the service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial, we can see how to reset the service in the Renault Kangoo, an extremely simple and quick operation. Before proceeding, we must have

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos