Do it yourself
Frequently asked questions about cars and motorcycles

How to Enter the Radio Unlock Code in a Renault Kangoo?

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Warning light – error code

In this tutorial, you will see how to enter the radio unlock code in a Renault Kangoo, a very simple and quick operation to perform, for example, after replacing the battery. The code can be found in the documents provided at purchase, but if lost, it can be retrieved through one of the various online services. Once obtained, insert the key and turn on both the instrument panel and the radio, then repeatedly press the "1" button until you reach the first digit. Continue entering the remaining digits with the "2", "3", and "4" buttons, and save the setting with the "6" button.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2007-2014 / Twingo 2) In this video, learn how to enter the radio code after removing the battery or replacing the stereo on a Renault Twingo. This is a very simple operat…
Renault Twingo (2007-2014 / Twingo 2) To remove the car radio from a Renault or Dacia, follow this simple procedure: insert the appropriate double needles into the four holes located at t…
Renault Twingo (2007-2014 / Twingo 2) On the Renault Twingo, the fuses are contained within dedicated fuse boxes installed on the vehicle. This type of car has a single box that contains …

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 2014-2024 - What to do if the "STOP" warning light comes on in the Renault Twingo? Read answer
    • Twingo 2014-2024 - What does the "STOP" warning light mean in the Renault Twingo? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos