Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Warning light – error code

If you want to change the engine oil and filter on this vehicle, you must reset the service light that is illuminated on the instrument panel. Follow the instructions and steps outlined below. First, turn on the instrument panel. Press the button at the end of the right stalk to scroll through the computer menu until you reach the maintenance option. Press and hold the button until the message flashes. Release the button at the end of the new interval flashing and check that the reset has been successful.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Renault Modus?
How to reset the service in the Renault Modus?
Renault Modus (2004-2013 / MK 1) In this tutorial we can see how to reset the service in the Renault Modus, an extremely simple and quick operation, to be carried out only once all s…
How to Reset the Service Light on a Renault Modus?
How to Reset the Service Light on a Renault Modus?
Renault Modus (2004-2013 / MK 1) In this tutorial, we will see how to reset the service light on a Renault Modus, a very simple and quick operation to be performed only after complet…
How to reset the service in the Renault Modus?
How to reset the service in the Renault Modus?
Renault Modus (2004-2013 / MK 1) In this tutorial, we can see how to reset the service indicator in the Renault Modus, an extremely simple and quick operation that should be done onl…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos