Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of Renault Twingo 1.

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Air filter

If you want to replace the air filter on your Renault Twingo Mk1 by yourself but don't know how to do it, don't worry because in this new guide you will find all the instructions you need. First of all, turn off your Renault Twingo and lift the front hood completely. Immediately after, locate the air filter box in the upper part of the engine compartment and rotate its cover counterclockwise so that it can be easily removed. At this point, all you have to do is replace the old filter with the new one and correctly reassemble the cover of the box.

Posted on 16 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Renault Twingo 3
How to replace the cabin air filter of the Renault Twingo 3
Renault Twingo (2014-2024 / Twingo 3, Twingo III) If you want to replace the cabin air filter in your third generation Renault Twingo by yourself, all you have to do is follow the steps described. Fi…
Renault Twingo 2 1.5 DCi air filter replacement
Renault Twingo 2 1.5 DCi air filter replacement
Renault Twingo (2007-2014 / Twingo 2) In this video tutorial we will see the instructions to be able to remove and replace the engine air filter of a Renault Twingo 2 1.5 DCi. First of al…
How to replace the air filter of the Renault Twingo 1
How to replace the air filter of the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) Replacing the air filter of the Renault Twingo 1 follows very simple steps that can be done independently. The first step is to open the front hood. …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos