Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Battery on a Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

In this tutorial, see how to replace the starter battery on a Renault Clio 3. Remove the air vent cover by releasing the appropriate tab, then press both tabs that secure the battery cover simultaneously and remove it along with its right side flange.

Next, using a 13mm socket, unscrew the battery mounting plate and take it out. Using a 10mm spanner, start disconnecting the negative (black) battery terminal, followed by the positive (red) terminal.

Once this is done, you can extract the old battery and fit a new one by reversing the procedure.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on a Renault Clio 1.5 dCi
How to replace the starter motor on a Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the starter motor on a Renault Clio 1.5 dCi. First, open the bonnet and disconnect …
How to Replace the Starter Motor of the Renault Clio 1.9D
How to Replace the Starter Motor of the Renault Clio 1.9D
Renault Clio (1998-2005 / MK 2, Clio 2) Today's information will allow us to remove and replace the starter motor of the Renault Clio 1.9D. First, open the vehicle's bonnet and start by rem…
Guide to replacing the starter motor of the Renault Clio
Guide to replacing the starter motor of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Today's instructions will show us how to disassemble and replace the starter motor of the Renault Clio. First, we open the engine hood of the car and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos