How to Reset the Tyre Pressure on a Renault Captur

To reset the tyre pressure on a Renault Captur, follow these steps: 1. Ensure that the tyre pressure is correct: Before proceeding with the reset, make sure the tyre pressure is as recommended for your Renault Captur. You can find this information in the owner's manual or on the driver's door sill. 2. Ensure all doors are closed: To start the reset procedure, it is important that all doors of the vehicle are closed. 3. Turn on the car: Insert the key in the "accessory" position (on but without starting the engine) or press the engine start button, depending on your Renault Captur's starting type. 4. Access the car menu: Now, access the main menu of the car using the controls on the steering wheel or dashboard. 5. Select the "TPMS System" section: In the menu, you should find a section called "TPMS" (Tyre Pressure Monitoring System).

Select this section. 6. Start the reset procedure: Once in the TPMS section, you should see the option to start the tyre pressure reset procedure. Select this option to begin the process. 7. Wait for completion: The TPMS will execute the reset and may take a few minutes to complete the process.

During this time, it is best not to move the car. 8. Check the tyre pressure: After the reset is complete, check the tyre pressure again to ensure it is correct and adjust if necessary.