Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Renault Megane 4

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

To replace the battery in the key fob of your Renault Megane 4, you will need a small flat-head screwdriver or an old key to use for leverage, along with a new battery of the correct type, specifically a flat CR 2032 3V. Take the key fob and use the screwdriver or the old key to pry open the slot on the bottom of the casing, under the car logo.

This will open the fob and give you access to the battery compartment; proceed to replace the old battery and close the fob.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on the Renault Megane
How to Replace the Key Fob Battery on the Renault Megane
Renault Megane (2002-2010 / Megane 2) These short and simple steps will guide you on how to disassemble and replace the battery of the key fob for the Renault Megane, following the instru…
How to Change the Key Fob Battery of a Renault Megane
How to Change the Key Fob Battery of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How do you change the key fob battery of a Renault Megane? Let's see in this detailed video how to do it. Take the key fob and, using your fingers (t…
How to Replace the Remote Battery on the Renault Megane
How to Replace the Remote Battery on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this video, see how to replace the flat battery in the Renault Megane remote; this video also applies to other contemporary models using the same …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos