Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses in the Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Fuse box

In this video, you can see where the fuses are located in the Renault Captur and the diagrams of the respective boxes, useful in case you need to check the fuse of a malfunctioning device. As shown, the first box is located inside the cabin, specifically in the lower area of the dashboard on the driver's side. The second box is positioned in the engine compartment, protected by the plastic cover next to the battery. In case of a damaged fuse, ensure you use a replacement with equivalent characteristics.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Renault Captur?
Where are the fuses located in the Renault Captur?
Renault Captur (2013-2019 / MK 1) The fuses in the Renault Captur are contained within the designated fuse boxes installed in the vehicle: in this model, you can find two boxes that c…
Where Are the Fuses Located on a Renault Captur?
Where Are the Fuses Located on a Renault Captur?
Renault Captur (2013-2019 / MK 1) The fuse boxes in the Renault Captur contain the fuses: there are two, located in the cabin and the engine compartment. The first is found at the bot…
Where are the fuses of the cabin of the Renault Captur 2 located?
Where are the fuses of the cabin of the Renault Captur 2 located?
Renault Captur (2019-2026 / MK 2) If you own a second-generation Renault Captur and want to find out where the interior fuses are located, all you have to do is follow the following p…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos