Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Megane
  6. : Determining the correct tire pressure for the Renault Megane.

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tires
Operation: Determining the correct tire pressure for the Renault Megane.

In this video, we see how to determine the correct tire pressure on the Renault Megane. This information can be found on the driver's side door thickness, and we will need to adjust it according to our driving style at that moment, whether we are alone or fully loaded, perhaps with luggage. In this case, the pressure will need to be adjusted for the different service required by the tires. To do this, we will need to unscrew the valve cap, connect the hose, check the cold pressure, and adjust it if necessary. Then, we will need to remove the hose and screw the valve back on. This operation must also be done for the spare wheel if available.


Posted on 2 November 2023 by ScegliAuto



How do you reset the tire pressure warning light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In order to reset the tire pressure sensor of the Renault Megane, first you need to inflate the tires, bringing them back to the correct inflation pr
How to reset the tire pressure warning light in the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, we can see how to reset the tire indicator in the Renault Megane, an extremely simple and quick operation. Before proceeding, we mu
How to reset the tire pressure light in the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, we can see how to reset the tire pressure warning light in the Renault Megane, an extremely simple and fast operation, to be carrie

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos