Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlights of the Renault Scenic II

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight

See other generations:
Video tutorial

In this video, we can see that removing the front headlights of a Renault Scenic II is not a very simple operation, as it involves completely removing the front bumper. It is not particularly complex, but it is certainly not the job you would want to do just to remove a headlight.

Anyway, start by opening the bonnet, removing the clips that hold the front trim to the chassis, then remove the inner wheel arch liners, disconnect the electrical connectors, and pull the front bumper towards you. Now remove the supports that hold the headlight, then remove the clips that still secure it from the top, and finally, you can take it out of its place.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlights of the Renault Scenic
How to Replace the Front Headlights of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) This guide shows you how to remove and replace the front headlights of the Renault Scenic, following the instructions below. First, open the bonnet o…
How to Remove the Rear Bumper of a Renault Scenic
How to Remove the Rear Bumper of a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you begin, open the rear hatch of your Renault Scenic. Start by unscrewing and removing the screws that secure the rear lights, then pull them…
How to Remove the Rear Lights from a Renault Scenic?
How to Remove the Rear Lights from a Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) In this tutorial, you will see how to remove the rear lights from a Renault Scenic, a very simple operation to perform if you need to replace a bulb …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos