Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights from a Renault Scenic?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light

In this tutorial, you will see how to remove the rear lights from a Renault Scenic, a very simple operation to perform if you need to replace a bulb or the light itself. First, ensure that the key is not inserted for safety, then open the boot and unscrew the two fixing bolts of the light using a Torx spanner. Once done, grasp the light, pull it towards you, and extract it from the bodywork. Finally, disconnect the power connector and proceed with replacing the damaged element.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gas Struts on a Renault Scenic
How to Replace the Gas Struts on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Are the gas struts on your Scenic due for replacement? How to remove and reinstall them? This video shows how to replace the struts on the rear tailg…
How to Replace the Rear Lights on the Renault Grand Scenic?
How to Replace the Rear Lights on the Renault Grand Scenic?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) In this tutorial, you will see how to replace the rear lights on the Renault Grand Scenic, an extremely simple and quick operation. First, ensure tha…
How to Remove the Rear Bumper of a Renault Scenic
How to Remove the Rear Bumper of a Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Before you begin, open the rear hatch of your Renault Scenic. Start by unscrewing and removing the screws that secure the rear lights, then pull them…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos