Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate and Deactivate the Speed Limiter on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Onboard computer

In this video, you will see how to activate and deactivate the speed limiter on the Renault Captur: use the buttons located on the left side of the steering wheel, and the button of interest is the first one from the top, depicting a speedometer with a small circle on the right side. The display will show "limiter ON", and set the maximum speed you want using the +/– buttons found at the left end of the same control panel. This way, even if you accelerate, the vehicle will not exceed the set speed. It is very convenient on roads with speed limits, ensuring you do not exceed them. To deactivate it, simply press the "0" button located in the centre of the control panel.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Renault Captur
How to Reset the Tyre Pressure Light on a Renault Captur
Renault Captur (2013-2019 / MK 1) Before starting, adjust the tyre pressures, then sit in the driver's seat and activate the instrument panel of your Renault Captur. Begin by repeated…
How to Remove the Wiper Blade from a Renault Captur?
How to Remove the Wiper Blade from a Renault Captur?
Renault Captur (2013-2019 / MK 1) Before starting, sit in the driver's seat of your Renault Captur. Begin by activating the instrument panel without starting the engine. Once done, qu…
How Cruise Control and Speed Limiter Work on a Renault Captur
How Cruise Control and Speed Limiter Work on a Renault Captur
Renault Captur (2019-2026 / MK 2) Let’s see how cruise control and the speed limiter work on a Renault Captur. The controls are found on a lever or dedicated buttons. The purpose of t…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2013-2019 - Why doesn't the on-board computer of a Renault Captur turn on? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos