Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2008 Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a 2008 Renault Trafic follows the same steps as resetting the service light on the Nissan Primastar; to reset the light, do the following: - Insert the key into the ignition; - Press the accelerator pedal; - Turn on the instrument panel; - Press the brake pedal three times; - Release the brake pedal and then the accelerator pedal; - Turn off the instrument panel; Finally, restart the panel to confirm the reset and check that it was successful.

Remember to reset only after performing the servicing operations.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Renault Trafic 3
How to Reset the Service Light on the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) This guide explains the steps to reset the service light related to the service interval on a Renault Trafic mk3 independently. To reset the service …
How to Reset the Service Light on a Renault Trafic
How to Reset the Service Light on a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Today, with the help of the following video tutorial, you will learn how to reset the service light on a Renault Trafic. After performing maintenance…
How to Reset the Service Light on the Renault Trafic
How to Reset the Service Light on the Renault Trafic
Renault Trafic (2001-2014 / MK 2) After carrying out the service operations, you need to reset the service light. This operation must be performed on all car models. To reset the serv…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos