Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to disassemble the rear lights on the Renault Megane?

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Tail light
Operation: How to disassemble the rear lights on the Renault Megane?

In this tutorial, we can see how to remove the rear lights in the Renault Megane, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the rear door, locate the circular cap located in the lower area of the inner edge of the light in question, and unclip it. Then unscrew both the newly released bolt and the upper bolt with a Torx key, grasp the light, and pull it outward to separate it from the bodywork. At this point, all that remains is to disconnect the power connector and install the replacement.


Posted on 17 January 2024 by ScegliAuto



Replacement of the license plate bulbs of the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) In this short and simple guide, we will see how to disassemble and replace the license plate lights of the Renault Megane, following these simple ste
How to remove the rear lights from the tailgate in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, we can see how to remove the rear lights of the tailgate in the Renault Megane, a very simple operation, in order to replace the bu
How to change the rear light on Renault Megane
Renault Megane (2002-2010 / Megane 2) In this guide, let's see how to disassemble and replace the rear light of the Renault Megane, in simple and quick steps. First of all, we open the ta

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos