Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Time on a Renault Master 2

Model: Renault Master MK 2 - Years 1997-2010
Part: Clock

In this brief video tutorial, we will see how to set the time on a second-generation Renault Master, produced from 1997 to 2010. Start by turning on the vehicle's instrument cluster, then press and hold the button on the speedometer. The time on the information display will start to flash, so release the button when the time stops flashing. After that, press the same button on the speedometer again to modify the vehicle's time as shown in the tutorial.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Setting the time on a Renault Master mk2
Setting the time on a Renault Master mk2
Renault Master (2010-2023 / MK 3) As with many other models in the Renault range, to change the time on the Renault Master clock, you need to press a sequence of buttons located on th…
Set the time on the Renault Master
Renault Master (2010-2023 / MK 3) When the power supply to the Renault Master is cut off and then restored, we need to set the time. To do this, we sit in the driver's seat, turn on t…
How to set the time on the Renault Master 2
How to set the time on the Renault Master 2
Renault Master (1997-2010 / MK 2) In this article, thanks to the support of the video tutorial, we will see how to adjust the time on the Renault Master 2. The procedure takes less th…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos