Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery on a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Key

In this video, you will learn how to change the battery in the remote key that opens and closes the doors of a Renault Clio when it runs out and needs replacing. Hold the remote and slide the top shell, the one with the button, in the opposite direction to the metal key to separate the two halves. Inside the top shell, you will find the battery compartment, which you will remove using a sharp tool. Insert the new battery with the positive terminal facing up, towards you. Reassemble the shells by sliding them together until they click into place.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Fob Battery for the Renault Clio
Replacing the Key Fob Battery for the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Here are the steps to disassemble and replace the battery of the key fob for the Renault Clio, as well as the Captur. First, take your key fob and re…
How to Replace the Remote Battery on a Renault Clio?
How to Replace the Remote Battery on a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the remote battery on a Renault Clio, press the designated button at the top of the device to lift the ignition key. Use a screwdriver to …
How to Replace the Remote Battery in a Renault Clio 5
How to Replace the Remote Battery in a Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) Next, discover how to correctly and quickly replace the button battery located inside the remote of your new Renault Clio fifth series (2019-2022). F…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos