Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Poly-V Belt on a Renault Twingo I

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: V-belt

See other generations:
Video tutorial

In this video, you will see how to replace the service belt on a Renault Twingo I: open the bonnet and lift the vehicle. From underneath, loosen the fixing device of the tensioner pulley with a 21 mm spanner, and set it aside.

Remove the compressor belt and loosen the alternator bracket. Now you can loosen the multi-function belt and replace it. You can find this component on Motordoctor.it with the code K014PK928 for £34.44 plus £9.95 delivery charges.

Now, refit the belt onto the crankshaft pulley, ensuring the belt is properly tensioned on all pulleys. Tighten the upper alternator bracket, then the lower one, and finally, replace the compressor belt.

Return the compressor pulley to its original position, lower the vehicle, and run the engine for a few minutes.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) To replace the timing belt on a Renault Twingo, lift the car using a jack or ramp so that the front right wheel can be completely removed along with …
How to Change the Auxiliary Belt on a Renault Twingo MK1
How to Change the Auxiliary Belt on a Renault Twingo MK1
Renault Twingo (1993-2007 / Twingo 1) In this video, we will see how to replace the auxiliary belt on a Renault Twingo MK1: the engine must be cold, and the handbrake engaged. Lift the ca…
Location and Diagram of the Fuse Box on Renault Twingo
Location and Diagram of the Fuse Box on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The fuse box for the cabin is located inside the glove compartment on the Renault Twingo. Here you will find, for example, the fuse that controls the…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos