Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Does the 'Service Promptly' Message Mean on a Renault Master Van and How to Remove It?

Model: Renault Master MK 3 - Years 2010-2023
Part: Checks and maintenance

If the 'Service Promptly' message has appeared on the instrument panel of your Renault Master van, it means it's time to carry out a service as the relevant interval has been reached. Once this has been done at your trusted garage, you can manually remove the light by following the procedure shown in this tutorial. First, turn on the instrument panel, then navigate to the screen displaying the message using the directional arrows on the right stalk. Finally, press the up arrow button once to enter the section, and a second time to complete the reset.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Renault Master Van?
How to Reset the Service Light on the Renault Master Van?
Renault Master (2010-2023 / MK 3) In this tutorial, see how to reset the service light on the Renault Master van, an extremely simple and quick operation to perform only after complet…
How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) Resetting the service light on the Renault Master is very simple. First, ensure you have completed the maintenance work required at the specified mil…
How to reset the service in the Renault Master van?
How to reset the service in the Renault Master van?
Renault Master (2010-2023 / MK 3) In this tutorial we can see how to reset the service in the Renault Master van, an extremely simple and fast operation. Before proceeding, we must ha…

    Frequently Asked Questions

    • Master 2010-2023 - What problems does the Renault Master 2.3 dCi have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos