Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Clutch Master Cylinder on the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014

This guide provides the main instructions to remove and replace the clutch master cylinder on the Renault Twingo. First, get in the vehicle and disconnect the master cylinder from the clutch pedal; then open the bonnet and remove the air filter box to access the master cylinder, as shown in the video. At this point, remove and replace the clutch master cylinder with the new original one, then top up with new fluid, following the video tutorial to the end!

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2014-2024 / Twingo 3, Twingo III) Below are the instructions needed to remove and replace the front bumper on a Renault Twingo. First, raise the vehicle at the front and start unscrew…
Renault Twingo (1993-2007 / Twingo 1) Replacing a damaged wheel on the Renault Twingo? Let's go through the process. Open the boot and take out the wheel removal kit, which includes: jack…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 2007-2014 - How many km does a Renault Twingo 1.2 petrol in reserve travel? Read answer
    • Twingo 1993-2007 - Where is the Renault Twingo horn located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos