Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Tailgate Handle on a Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Handle

Today, let’s go through the steps to remove and replace the external handle of the rear tailgate on a Renault Master. First, open the rear tailgate and start removing the plastic panel by prying at the sides; then unscrew the handle screws and detach the mechanism, removing it from the outside, as shown in the video. At this point, install the new external handle, securing it properly; ensure the handle functions correctly before reassembling the rear tailgate, following the video tutorial to the end!

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the external handle of the rear tailgate of the Renault Master?
How do you replace the external handle of the rear tailgate of the Renault Master?
Renault Master (2024-2026 / MK 4, XDD) In order to replace the external handle of the rear tailgate of the Renault Master, you need to open the corresponding tailgate so that the internal …
How to replace the taillights on the Renault Master van?
How to replace the taillights on the Renault Master van?
Renault Master (1997-2010 / MK 2) In this tutorial we can see how to replace the rear lights in the Renault Master van, an extremely simple and quick operation. First of all, make sur…
How to Replace the Outer Door Handle of the Front Door on the Renault Master
How to Replace the Outer Door Handle of the Front Door on the Renault Master
Renault Master (2010-2023 / MK 3) In this guide, you will find instructions to dismantle and replace the outer door handle of the front door on the Renault Master. First, open the fro…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos